Adidas AG launched a new sneaker on Friday with a 3D-printed sole that it plans to mass-produce next year, part of a broader push by the German sportswear firm to react faster to changing fashions and create more customized products.
Adidas already lets people customize the color and pattern of shoes ordered online, but new 3D printing methods will make small production runs, limited edition shoes and even soles designed to fit an individual’s weight and gait economical.
Rivals Nike Inc, Under Armour Inc and New Balance Athletic Shoe Inc have also been experimenting with 3D printing, but have so far only used the technique to make prototypes, soles tailored for sponsored athletes and a handful of high-priced novelty shoes.
That is because traditional 3D printers are slower, more expensive and often create an inferior product than the injection moulds for plastic that are currently used to produce hundreds of millions of shoes each year, mostly in Asia.
However, Adidas says its new partnership with Silicon Valley start-up Carbon allows it to overcome many of those difficulties to produce a sole that can rival one made by an injection mould, and at a speed and price that allow for mass production.
“This is a milestone not only for us as a company, but also for the industry,” Adidas head of technology innovation Gerd Manz said when announcing the launch of its new “Futurecraft 4D” shoe. “We’ve cracked some of the boundaries.”
Carbon, financed by venture firms such as Sequoia Capital Operations LLC as well as funds set up by General Electric Co and Alphabet Inc’s Google, has pioneered a technique that prints with light-sensitive polymer resin that is then baked for strength.
Standard 3D printers build up products with layers of plastic powder, a method used by Hewlett Packard, which is working with Nike, and says its newest machines work 10 times faster and at half the cost than earlier models.
Adidas hopes to sell 5,000 pairs of its “Futurecraft 4D” this year, and 100,000 next year as Carbon cuts the time it takes to print a sole from the current hour and a half to as low as 20 minutes per sole.
The shoes will sell at an unspecified premium price, but Adidas plans to lower the cost as the technology develops.
Late last year Adidas sold a few hundred pairs of running shoes with soles made by regular 3D printing for US$333, but they were relatively rigid and heavy and took 10 hours to print.
Carbon’s technology will allow Adidas to make small batches of shoes far more quickly.
Small production runs were not economical before as the metal moulds for most soles need to be used 10,000 times to pay for themselves, and they take four to six weeks to cast and grind.
“What you can do is introduce more types of products without a cost penalty,” said Terry Wohlers, head of Wohlers Associates, a US firm specializing in 3D printing. “With this technology, you can produce one or a few inexpensively.”
Wohlers expects the 3D printing industry to more than quadruple sales to US$26 billion by 2022, driven mostly by the automotive, medical, dental and jewelry sectors.
Adidas initially plans batches of shoes tailored to specific sports or cities, but hopes consumers will eventually be measured and tested in store to design perfectly fitting shoes tweaked for an individual’s gait, weight and type of sport.
“Individualization will come, but you’ve got to learn to walk before you run,” Manz said, citing a poll that found 80 percent of consumers want to be part of the process.
Shiina Ito has had fewer Chinese customers at her Tokyo jewelry shop since Beijing issued a travel warning in the wake of a diplomatic spat, but she said she was not concerned. A souring of Tokyo-Beijing relations this month, following remarks by Japanese Prime Minister Sanae Takaichi about Taiwan, has fueled concerns about the impact on the ritzy boutiques, noodle joints and hotels where holidaymakers spend their cash. However, businesses in Tokyo largely shrugged off any anxiety. “Since there are fewer Chinese customers, it’s become a bit easier for Japanese shoppers to visit, so our sales haven’t really dropped,” Ito
The number of Taiwanese working in the US rose to a record high of 137,000 last year, driven largely by Taiwan Semiconductor Manufacturing Co’s (TSMC, 台積電) rapid overseas expansion, according to government data released yesterday. A total of 666,000 Taiwanese nationals were employed abroad last year, an increase of 45,000 from 2023 and the highest level since the COVID-19 pandemic, data from the Directorate-General of Budget, Accounting and Statistics (DGBAS) showed. Overseas employment had steadily increased between 2009 and 2019, peaking at 739,000, before plunging to 319,000 in 2021 amid US-China trade tensions, global supply chain shifts, reshoring by Taiwanese companies and
Taiwan Semiconductor Manufacturing Co (TSMC, 台積電) received about NT$147 billion (US$4.71 billion) in subsidies from the US, Japanese, German and Chinese governments over the past two years for its global expansion. Financial data compiled by the world’s largest contract chipmaker showed the company secured NT$4.77 billion in subsidies from the governments in the third quarter, bringing the total for the first three quarters of the year to about NT$71.9 billion. Along with the NT$75.16 billion in financial aid TSMC received last year, the chipmaker obtained NT$147 billion in subsidies in almost two years, the data showed. The subsidies received by its subsidiaries —
Taiwan Semiconductor Manufacturing Co (TSMC) Chairman C.C. Wei (魏哲家) and the company’s former chairman, Mark Liu (劉德音), both received the Robert N. Noyce Award -- the semiconductor industry’s highest honor -- in San Jose, California, on Thursday (local time). Speaking at the award event, Liu, who retired last year, expressed gratitude to his wife, his dissertation advisor at the University of California, Berkeley, his supervisors at AT&T Bell Laboratories -- where he worked on optical fiber communication systems before joining TSMC, TSMC partners, and industry colleagues. Liu said that working alongside TSMC
RSS