Officials from Taiwan's two leading semiconductor foundries yesterday said that they were selling more chips made with leading edge technology.
"I can confirm that TSMC's sales are better. New orders are for products of our most advanced processes," said Tzeng Jinnhaw (
He would not provide further details.
Rumors in the industry purport that TSMC is selling as many chips as it can make using its highest technology manufacturing processes -- on a scale of 0.18, 0.15 and 0.13 microns. Such fine manufacturing -- etching transistors over 100-times thinner than a human hair onto a chip -- commands the highest prices.
TSMC is manufacturing chips at this level for Nvidia, a US-based graphics chip designer, for use in Microsoft's new Xbox game consoles.
An official at United Microelectronics Corp (UMC, 聯電), the second-biggest chip foundry in Taiwan, also said sales at top end processes had increased, but that the company has not sold out on the 0.18 and 0.15 micron processes.
According to a report published by the Netherlands-based Semiconductor International Capacity Statistics (SICS) group earlier this week, demand for processes below 0.20 microns rose 32.1 percent between the first and second business quarters of this year and another 7.5 percent quarter on quarter in the third.
The research group also pre-dicted companies would not likely make new investments in older 0.25 micron processes, as chip-design firms have moved aggressively to create new products at the highest technology levels available -- the 0.18, 0.15 and 0.13 micron processes.
Falling utilization rates
The group said the manufacturing utilization rates on older 0.30 to 0.20 micron processes has fallen from 87.1 percent in the first quarter of this year to just 56.3 percent in the third quarter.
Increased demand for these high-tech chipmaking processes also showed up on both companies' third quarter reports. TSMC said sales of chips made at 0.18 microns increased from 4 percent of total sales in the second quarter to 15 percent in the third quarter, as overall sales increased.
Demand dropped for 0.25 microns, which made up 39 percent of TSMC sales in the second quarter but only 31 percent in the third quarter.
TSMC reported third-quarter net profits suffered a 94 percent drop from the same period last year to NT$1.24 billion (US$35.9 million). UMC forecasts a loss of NT$3.2 billion (US$92.9 million) this year.
The overall utilization rates, which tracks the number of production lines actually churning out chips, also dropped in the second and third quarters.
But both companies predict a slight increase in the number of production lines churning out chips during this quarter.
"The fourth quarter will be better than the third quarter, but this is just a mild recovery," said TSMC Chairman Morris Chang (
After falling to as low as 41 percent during the third quarter, TSMC said its overall utilization rate would rise a few percentage points in the third. UMC said the 40 percent utilization rate it registered in the third quarter would rise to around 45 percent.
ISSUES: Gogoro has been struggling with ballooning losses and was recently embroiled in alleged subsidy fraud, using Chinese-made components instead of locally made parts Gogoro Inc (睿能創意), the nation’s biggest electric scooter maker, yesterday said that its chairman and CEO Horace Luke (陸學森) has resigned amid chronic losses and probes into the company’s alleged involvement in subsidy fraud. The board of directors nominated Reuntex Group (潤泰集團) general counsel Tamon Tseng (曾夢達) as the company’s new chairman, Gogoro said in a statement. Ruentex is Gogoro’s biggest stakeholder. Gogoro Taiwan general manager Henry Chiang (姜家煒) is to serve as acting CEO during the interim period, the statement said. Luke’s departure came as a bombshell yesterday. As a company founder, he has played a key role in pushing for the
China has claimed a breakthrough in developing homegrown chipmaking equipment, an important step in overcoming US sanctions designed to thwart Beijing’s semiconductor goals. State-linked organizations are advised to use a new laser-based immersion lithography machine with a resolution of 65 nanometers or better, the Chinese Ministry of Industry and Information Technology (MIIT) said in an announcement this month. Although the note does not specify the supplier, the spec marks a significant step up from the previous most advanced indigenous equipment — developed by Shanghai Micro Electronics Equipment Group Co (SMEE, 上海微電子) — which stood at about 90 nanometers. MIIT’s claimed advances last
CROSS-STRAIT TENSIONS: The US company could switch orders from TSMC to alternative suppliers, but that would lower chip quality, CEO Jensen Huang said Nvidia Corp CEO Jensen Huang (黃仁勳), whose products have become the hottest commodity in the technology world, on Wednesday said that the scramble for a limited amount of supply has frustrated some customers and raised tensions. “The demand on it is so great, and everyone wants to be first and everyone wants to be most,” he told the audience at a Goldman Sachs Group Inc technology conference in San Francisco. “We probably have more emotional customers today. Deservedly so. It’s tense. We’re trying to do the best we can.” Huang’s company is experiencing strong demand for its latest generation of chips, called
GLOBAL ECONOMY: Policymakers have a choice of a small 25 basis-point cut or a bold cut of 50 basis points, which would help the labor market, but might reignite inflation The US Federal Reserve is gearing up to announce its first interest rate cut in more than four years on Wednesday, with policymakers expected to debate how big a move to make less than two months before the US presidential election. Senior officials at the US central bank including Fed Chairman Jerome Powell have in recent weeks indicated that a rate cut is coming this month, as inflation eases toward the bank’s long-term target of two percent, and the labor market continues to cool. The Fed, which has a dual mandate from the US Congress to act independently to ensure