The world’s largest plane makers are soaring these days, fueled by historic demand for new jets that has cranked up their factories to record speeds.
However, booming sales of aircraft, far from being a bonanza for suppliers, are spurring brutal competition between Airbus Group NV and Boeing Co, which are demanding better deals from the companies that make billions of parts the factories need.
GM Nameplate is one such company. The 400-employee Seattle firm makes the signs and placards posted on everything from overhead bins to emergency exits: about 1,500 signs per plane, or 1.6 million a year to Boeing alone.
Photo: Reuters
As Boeing sped up jet output by 40 percent over the past three years, it not only asked GM Nameplate to turn out more signs. It also wanted a 15 to 20 percent price cut, said Paul Michaels, director of GMN Aerospace, the aircraft division.
“That’s huge,” Michaels said.
Boeing also wanted GMN to show it was able to meet faster production speeds and that it had the financial health to stay in business. The company spent a week with two Boeing coaches going over its factory. Michaels says he now expects to hit the price target in 2016 and ultimately to be better off.
However, “it was very nerve-racking at first,” he said.
The price pressure has left many small-tier suppliers grappling with whether to invest and grow, sell to big players or simply fold.
“It’s forcing suppliers to say either I’m in the game or out of the game,” said Christian Schiller, managing director at Cascadia Capital, a Seattle investment bank. “They can’t just stay still.”
He and others predict buyouts in the sector will rise this year as pressure grows, even though prices for small companies are already relatively high.
Since suppliers provide more than two-thirds of a jetliner’s content by value, they are obvious places for Boeing and Airbus to find cost savings. However, squeezing too hard could cause production snarls and hurt an industry that is struggling to keep up with rising demand.
Airbus last week said it would notch up production of its single-aisle A320 planes by nearly 10 percent, matching a similar move by Boeing. Both companies are also building many of their double-aisle plans at faster rates.
By 2017, Boeing and Airbus will be churning out a staggering 138 new jetliners a month. Smaller plane makers Embraer SA and Bombardier Inc are also raising output and bringing new jets to market.
‘NO FLY’ LIST
As thousands of suppliers gear up, Boeing and Airbus are pitting them against each other in price competitions to drive down supplier prices more than in the past, suppliers say.
Boeing says it will put companies that do not cut prices on a “no fly” list that bars them from future work, while rewarding those that do with the chance to bid on more work.
Both plane makers are also vying for a piece of the spare-parts market, demanding royalties on parts that are sold directly to airlines and never enter their factories.
Demanding lower prices in exchange for sales is a well-known tactic in other industries. Big retailers like Wal-Mart Stores Inc and Costco Wholesale Corp are famous for it. However, the large price cuts now hitting suppliers are new and are landing hard in an industry where sales volumes are relatively low.
Boeing and Airbus also make far less money selling finished planes than suppliers earn from selling parts. Boeing’s jetliner business, for example, had an operating profit margin of 10.8 percent last year, compared with an average of about 16 percent for suppliers. Airbus’ commercial aircraft profit margin was 4 percent.
“Plane makers have a legitimate gripe,” said Tom Captain, head of a global aerospace and defense consulting practice at Deloitte.
To some extent, aircraft makers are victims of their customers, the airlines. Planes are technical marvels that operate with great precision and safety, but the flying public still demands fares that cost less than a good hotel room, and jet fuel costs are likely to remain high. So airlines are driving hard bargains to pay as little as possible for jets.
Boeing is selling some jets more aggressively, since Airbus has gained 60 percent of the market for new single-aisle planes, a market that represents more than half of the new planes to be delivered over the next 20 years.
Boeing recently launched an internal campaign to fight for market share, opening itself to more negotiations over price. However, that requires driving down the cost of building planes.
Boeing and Airbus are also making their own operations more efficient, as they press suppliers to do the same, and are offering to help.
“It’s not going away,” Boeing supply chain vice president Stan Deal said of its cost-cutting program, Partnering for Success.
What’s most important to Boeing “is maintaining or gaining our long-term competitive advantage,” he said.
Of course, many suppliers are also benefiting from the boom. Larger companies and those with proprietary products say they have more leverage to push back against price pressure. Even when margins fall, larger volume can compensate and boost total profit.
Still, concern is rising because many smaller suppliers lack the capital and access to talent to make the price concessions plane makers are demanding.
“Some suppliers will have trouble and may not be able to step up to the challenge and thus go out of business, or sign contracts they cannot deliver on,” Captain said.
A 2011 study by PricewaterhouseCoopers of more than 100 aerospace suppliers found that 20 percent were at high risk of being unable to keep up with rising production and had relatively weak financials.
The pressure has increased since then, said Scott Thompson, head of PricewaterhouseCoopers’ US aerospace and defense business. Suppliers that make commodity products, such as GM Nameplate, are most at risk of losing work to rivals, since they face the greatest number of competitors.
The risk to Boeing and Airbus is biggest from “sole suppliers,” since any slip there risks fouling up the plane makers, Thompson said.
And because aerospace has relatively low volume compared with automobiles, there are many sole-supplier arrangements.
“It’s absolutely a risk,” Thompson said. “You have one supplier that has a problem. It can really have a significant effect on the supply chain.”
Even Boeing is having difficulty keeping pace. Its 787 factory in South Carolina has failed to finish fuselage sections on time. It is hiring contract workers and sending unfinished pieces to its larger factory in Washington to ease the bottlenecks.
DETROIT SQUEEZE
Consultant Dave Bender has seen this pressure before. In the mid-2000s he worked as a vice president at GDX Automotive, a major supplier of rubber window seals to Detroit automakers. Back then, one of the Big Three threatened to put GDX on a “no-bid” list unless it cut prices.
“I don’t care if I bankrupt you,” Bender recalls the auto executive saying.
Many suppliers did go out of business, he said.
GDX was eventually acquired by a bigger company.
A decade later, he saw something similar from plane makers as president of Crane Aerospace & Electronics, a Crane Co unit based in the Seattle area with about 2,300 employees.
Bender said his team could sometimes resist price cuts on products Crane designed, since the plane maker would have trouble finding other suppliers. And if Crane cut prices, it asked to bid for other work as a quid pro quo. Boeing allowed it.
“That puts pricing pressure on the current guy and allows us an opportunity to get in,” Bender said.
However, when its own contracts came up, Boeing and Airbus would make Crane compete against other companies on price.
“They’re pretty sharp about this,” said Bender, who left Crane last year. “They may give you the business in the end, but they’re going to get your price to come down.”
Boeing also asked Crane to pay royalties on replacement parts it sold.
“They know that some suppliers make very good margins on their aftermarket business, so they’re trying to get their piece of it,” Bender said.
Boeing said charging royalties on products that use its intellectual property help it “recover a portion of the value of our research and development.”
Increasingly, Boeing is asking suppliers to do design work, requiring a significant investment in engineers and time.
Under this new model, often called “pay to play,” suppliers might have to wait months to see revenue from their investment. If an aircraft is delayed, like the Boeing 787 and the Airbus A380, that could drag out years.
Some have struggled to make those contracts pay off. Spirit Aerosystems Holdings Inc, which makes 737 fuselages and numerous other parts for Boeing and Airbus, recently said it lost US$385 million on charges related to the 787.
TAKING A BUYOUT
Others cannot make the leap. Paul Van Metre and his partners in a Bellingham, Washington, machine shop said they could not stomach borrowing more money to expand and bid on more complex jobs for Boeing.
So a few weeks ago they sold their firm, Pro CNC, to an Irish company, TruLife, which makes prosthetics and wanted to diversify.
“We didn’t have the resources, and we didn’t want to put our personal guarantees on even more machines,” Van Metre said.
The Pro CNC sale is one of a rising number of acquisitions of aerospace suppliers. The huge demand for jets has made the suppliers attractive targets for bigger firms that want to lock in capacity and skilled workers.
Many owners, particularly in Washington, are near retirement and do not have the cash, or the personal desire, to invest and grow, Schiller said.
He just signed two companies that are looking to sell for that reason. Companies are selling for 8 to 10 times pre-expense earnings, he said, nearly double the levels two years ago.
In that environment, the price and investment pressure from Boeing and Airbus, he said, “is a catalyst for them to say: ‘We’re going to check out.’”
MAJOR BENEFICIARY: The company benefits from TSMC’s advanced packaging scarcity, given robust demand for Nvidia AI chips, analysts said ASE Technology Holding Co (ASE, 日月光投控), the world’s biggest chip packaging and testing service provider, yesterday said it is raising its equipment capital expenditure budget by 10 percent this year to expand leading-edge and advanced packing and testing capacity amid strong artificial intelligence (AI) and high-performance computing chip demand. This is on top of the 40 to 50 percent annual increase in its capital spending budget to more than the US$1.7 billion to announced in February. About half of the equipment capital expenditure would be spent on leading-edge and advanced packaging and testing technology, the company said. ASE is considered by analysts
TRANSFORMATION: Taiwan is now home to the largest Google hardware research and development center outside of the US, thanks to the nation’s economic policies President Tsai Ing-wen (蔡英文) yesterday attended an event marking the opening of Google’s second hardware research and development (R&D) office in Taiwan, which was held at New Taipei City’s Banciao District (板橋). This signals Taiwan’s transformation into the world’s largest Google hardware research and development center outside of the US, validating the nation’s economic policy in the past eight years, she said. The “five plus two” innovative industries policy, “six core strategic industries” initiative and infrastructure projects have grown the national industry and established resilient supply chains that withstood the COVID-19 pandemic, Tsai said. Taiwan has improved investment conditions of the domestic economy
Huawei Technologies Co’s (華為) latest smartphones carry a version of the advanced made-in-China processor it revealed last year, results from an independent analysis showed. This underscored the Chinese company’s ability to sustain production of the controversial chip. The Pura 70 series unveiled last week sports the Kirin 9010 processor, research firm TechInsights found during a teardown of the device. This is a newer version of the Kirin 9000s, made by Semiconductor Manufacturing International Corp (SMIC, 中芯) for the Mate 60 Pro, which had alarmed officials in Washington who thought a 7-nanometer chip was beyond China’s capabilities. Huawei has enjoyed a resurgence since
purpose: Tesla’s CEO sought to meet senior Chinese officials to discuss the rollout of its ‘full self-driving’ software in China and approval to transfer data they had collected Tesla Inc CEO Elon Musk arrived in Beijing yesterday on an unannounced visit, where he is expected to meet senior officials to discuss the rollout of "full self-driving" (FSD) software and permission to transfer data overseas, according to a person with knowledge of the matter. Chinese state media reported that he met Premier Li Qiang (李強) in Beijing, during which Li told Musk that Tesla's development in China could be regarded as a successful example of US-China economic and trade cooperation. Musk confirmed his meeting with the premier yesterday with a post on social media platform X. "Honored to meet with Premier Li