There has been a frenzy over 3D printing in recent months amid growing signs that the technology has the potential to replace traditional mass manufacturing methods.
The new technology provides a way to custom-make products at small factories, at a reduced cost and lead time. The technology is increasingly being used to make niche products such as parts for Boeing’s new 787 Dreamliner.
Now the government-funded Industrial Technology Research Institute (ITRI, 工研院) believes that 3D printing, denominated additive printing, could benefit the nation’s manufacturing industries.
Abandoning traditional ways of squeezing profits by using mass production to save costs, the institute aims to help firms explore new ways to apply the technique and add value to existing products.
To provide easier access to 3D printing technologies, ITRI last month launched the Additive Manufacturing and Laser Application Center.
“Our goal is to create new applications and to help firms upgrade their technologies, or transform their products into something with a higher added value,” director of the center, Horng Jibin (洪基彬) said during an interview with the Taipei Times on Aug. 1.
The center is located in Greater Tainan.
ITRI believes 3D printing and laser technologies can be used to manufacture medical devices and are suitable for industrial design.
A piece of metal for skull reconstruction made using 3D printing technology can be 60 percent to 70 percent lighter than ones made using traditional techniques, Horng said, as 3D printing can create materials with a porous structure.
ITRI has adopted a laser sintering technique, one of the better-established rapid prototyping methods for 3D stringent, depositing thin layers of metal powder to form complete objects in one go.
ITRI engineers are further developing cutting-edge 3D printing and laser techniques in the center’s four laboratories, in preparation for patent licensing for commercial use.
Initially, ITRI plans to assist companies in launching pilot production at the labs, using the institute’s 3D printing machine and laser equipment.
At the moment, ITRI has licensed its 3D printing technology to screwmaker Taiwan Shan Yin International Co (慶達) to manufacture dental implants, which are used in tooth restorations.
An ordinary screw may cost very little, but “a dental implant can be sold for NT$6,000 [US$200]. This shows how we aim to help local firms add value to their existing products,” Horng said.
ITRI aims to use 3D printing and laser technologies to boost revenue of equipment and products to NT$20 billion in the next four years to 2017 from the current NT$4 billion a year, Horng said.
Profit margins could be lifted to 23 percent from the current 18 percent, by selling equipment and new applications, rather than just making low-margin laser modules, he said.
Revenue from 3D printing alone is expected to expand to US$11.4 billion and further to US$18.9 billion in 2015, compared with US$8.9 billion last year, with the biggest portion coming from 3D printers, the Photonics Industry and Technology Development Association (PIDA, 光電科技工業協進會) said.
“Taiwan’s 3D printing industry is still in its infancy,” PIDA analyst Frank Fan (范懷仁) told the Taipei Times.
Jumping on the 3D printing bandwagon, several local companies including semiconductor and LCD equipment makers Contrel Technology Co (東捷科技) and Gallant Precision Machining Co (均豪) have set up new subsidiaries, or operations to develop equipment, or related applications, according to ITRI.
Last month, Getac Technology Corp (神基科技) formed a 3D printing joint venture with Japanese 3D printer maker Matsuura Machinery.
However, there are concerns about 3D printing technologies.
Hon Hai Precision Industry Co (鴻海精密) chairman Terry Guo (郭台銘) warned that 3D printing was only media hype.
Gou strongly opposed the idea that 3D printing will launch a third industrial revolution as it is not a brand new technology.
“Hon Hai introduced the company’s first 3D [printing] equipment 30 years ago,” Gou said.
Starting as a module manufacturer, Hon Hai now is the world’s biggest electronics manufacturer, counting Apple Inc as its top client.
Horng said it is true that 3D printing is not new, as the technique has been evolving.
“Additive manufacturing technology is maturing. It can make products with quality approaching to that made by subtractive technology and it [additive technology] is nearing its commercial use,” Horng said.
The technology is suitable for making small-volume niche parts, rather than as a substitute for the traditional module manufacturing technique, that has long been used to make large volumes of components, he said.
In subtractive manufacturing, products are made by removing materials.
In the initial stage, 3D printers were used to make plastic prototypes, but the technique is now being used to make the actual metal parts, Horng said.
That has greatly boosted the commercial use of 3D printing technology, he said.
Yulong Motor Co (裕隆汽車) has used 3D printing techniques to create a prototype of an engine for its Luxgen-brand motors to reduce marketing time, abandoning traditional modeling, which is time-consuming and expensive.
TYC Brother Industrial Co (堤維西) plans to make automotive front lights using 3D printing technology licensed from ITRI, according to the Ministry of Economic Affairs.
China has claimed a breakthrough in developing homegrown chipmaking equipment, an important step in overcoming US sanctions designed to thwart Beijing’s semiconductor goals. State-linked organizations are advised to use a new laser-based immersion lithography machine with a resolution of 65 nanometers or better, the Chinese Ministry of Industry and Information Technology (MIIT) said in an announcement this month. Although the note does not specify the supplier, the spec marks a significant step up from the previous most advanced indigenous equipment — developed by Shanghai Micro Electronics Equipment Group Co (SMEE, 上海微電子) — which stood at about 90 nanometers. MIIT’s claimed advances last
ISSUES: Gogoro has been struggling with ballooning losses and was recently embroiled in alleged subsidy fraud, using Chinese-made components instead of locally made parts Gogoro Inc (睿能創意), the nation’s biggest electric scooter maker, yesterday said that its chairman and CEO Horace Luke (陸學森) has resigned amid chronic losses and probes into the company’s alleged involvement in subsidy fraud. The board of directors nominated Reuntex Group (潤泰集團) general counsel Tamon Tseng (曾夢達) as the company’s new chairman, Gogoro said in a statement. Ruentex is Gogoro’s biggest stakeholder. Gogoro Taiwan general manager Henry Chiang (姜家煒) is to serve as acting CEO during the interim period, the statement said. Luke’s departure came as a bombshell yesterday. As a company founder, he has played a key role in pushing for the
EUROPE ON HOLD: Among a flurry of announcements, Intel said it would postpone new factories in Germany and Poland, but remains committed to its US expansion Intel Corp chief executive officer Pat Gelsinger has landed Amazon.com Inc’s Amazon Web Services (AWS) as a customer for the company’s manufacturing business, potentially bringing work to new plants under construction in the US and boosting his efforts to turn around the embattled chipmaker. Intel and AWS are to coinvest in a custom semiconductor for artificial intelligence computing — what is known as a fabric chip — in a “multiyear, multibillion-dollar framework,” Intel said in a statement on Monday. The work would rely on Intel’s 18A process, an advanced chipmaking technology. Intel shares rose more than 8 percent in late trading after the
GLOBAL ECONOMY: Policymakers have a choice of a small 25 basis-point cut or a bold cut of 50 basis points, which would help the labor market, but might reignite inflation The US Federal Reserve is gearing up to announce its first interest rate cut in more than four years on Wednesday, with policymakers expected to debate how big a move to make less than two months before the US presidential election. Senior officials at the US central bank including Fed Chairman Jerome Powell have in recent weeks indicated that a rate cut is coming this month, as inflation eases toward the bank’s long-term target of two percent, and the labor market continues to cool. The Fed, which has a dual mandate from the US Congress to act independently to ensure