A state-owned manufacturer yesterday unveiled the first plane produced by a Chinese initiative to compete in the market for large passenger jetliners.
China is one of the biggest aviation markets, but relies on Boeing and Airbus aircraft. The multibillion-dollar effort to create the homegrown C919 jetliner is aimed at clawing back some of the commercial benefits that flow to foreign suppliers.
The Commercial Aircraft Corp of China (COMAC, 中國商飛) showed off the first of the twin-engine planes in a ceremony attended by about 4,000 government officials and other guests at a hangar near Shanghai’s Pudong International Airport.
Photo: Reuters
“It’s a major push for the country, as they want to be known as a major player in airplane manufacturing,” said Mavis Toh, Asia air transport editor for Flightglobal magazine.
The C919 is one of several initiatives launched by the ruling Chinese Communist Party to transform the nation from the world’s low-cost factory into a creator of profitable technology in aviation, clean energy and other fields.
The C919, which can seat up to 168 passengers, is meant to compete in the market for single-aisle jets dominated by Airbus Industrie’s A320 and Boeing Co’s 737.
Its manufacturer, known as COMAC, says it has received orders from 21 customers for a total of 517 aircraft, mostly from Chinese carriers, but also from GE Capital Aviation Services.
A separate state-owned company has also developed a smaller regional jet, the ARJ-21, to compete in the market dominated by the Brazilian Embraer and the Canadian Bombardier. The first two ARJ-21s were delivered last year to a Chinese airline.
Most of the C919’s critical systems including engines and avionics are being supplied by Western companies or foreign-Chinese joint ventures.
Boeing forecasts China’s total demand for civilian jetliners over the next two decades at 5,580 planes worth a total of US$780 billion.
China’s major airlines are state-owned, which gives the government a captive pool of potential customers that can be ordered to buy the C919.
“China offers a terrific market, superb engineering talent and reasonably low costs. Developing a national aircraft industry makes a lot of sense,” Richard Aboulafia, vice president for analysis of Teal Group Corp, an industry consultant said in a report in July.
However, the C919 is hampered by official requirements that its manufacturer favor components produced in China, unlike competitors who source parts globally, according to Aboulafia.
“This means Western suppliers need to give away technology to play on this jet,” Aboulafia said.
“It also means that this aircraft is designed by people whose hands have been tied,” he added.
Development of the C919 began in 2008. Plans called for a first flight last year and for it to enter service in next year, but those targets were pushed back due to production delays. The C919 is now due to fly next year and enter service in about 2019.
One of the biggest components, the core processing and display system, is being supplied by a joint venture between GE Aviation Systems and Aviation Industry Corporation of China (AVIC, 中國航空工業), a state-owned Chinese military contractor.
Other suppliers include Honeywell, Rockwell Collins and Hamilton Sunstrand.
CHIP WAR: Tariffs on Taiwanese chips would prompt companies to move their factories, but not necessarily to the US, unleashing a ‘global cross-sector tariff war’ US President Donald Trump would “shoot himself in the foot” if he follows through on his recent pledge to impose higher tariffs on Taiwanese and other foreign semiconductors entering the US, analysts said. Trump’s plans to raise tariffs on chips manufactured in Taiwan to as high as 100 percent would backfire, macroeconomist Henry Wu (吳嘉隆) said. He would “shoot himself in the foot,” Wu said on Saturday, as such economic measures would lead Taiwanese chip suppliers to pass on additional costs to their US clients and consumers, and ultimately cause another wave of inflation. Trump has claimed that Taiwan took up to
A start-up in Mexico is trying to help get a handle on one coastal city’s plastic waste problem by converting it into gasoline, diesel and other fuels. With less than 10 percent of the world’s plastics being recycled, Petgas’ idea is that rather than letting discarded plastic become waste, it can become productive again as fuel. Petgas developed a machine in the port city of Boca del Rio that uses pyrolysis, a thermodynamic process that heats plastics in the absence of oxygen, breaking it down to produce gasoline, diesel, kerosene, paraffin and coke. Petgas chief technology officer Carlos Parraguirre Diaz said that in
SUPPORT: The government said it would help firms deal with supply disruptions, after Trump signed orders imposing tariffs of 25 percent on imports from Canada and Mexico The government pledged to help companies with operations in Mexico, such as iPhone assembler Hon Hai Precision Industry Co (鴻海精密), also known as Foxconn Technology Group (富士康科技集團), shift production lines and investment if needed to deal with higher US tariffs. The Ministry of Economic Affairs yesterday announced measures to help local firms cope with the US tariff increases on Canada, Mexico, China and other potential areas. The ministry said that it would establish an investment and trade service center in the US to help Taiwanese firms assess the investment environment in different US states, plan supply chain relocation strategies and
Japan intends to closely monitor the impact on its currency of US President Donald Trump’s new tariffs and is worried about the international fallout from the trade imposts, Japanese Minister of Finance Katsunobu Kato said. “We need to carefully see how the exchange rate and other factors will be affected and what form US monetary policy will take in the future,” Kato said yesterday in an interview with Fuji Television. Japan is very concerned about how the tariffs might impact the global economy, he added. Kato spoke as nations and firms brace for potential repercussions after Trump unleashed the first salvo of