US factories are closing. US manufacturing jobs are reappearing overseas. China’s industrial might is growing each year.
And it might seem as if the US doesn’t make world-class goods as well as some other nations.
“There’s no reason Europe or China should have the fastest trains, or the new factories that manufacture clean energy products,” US President Barack Obama said in his State of the Union policy address last week.
Yet the US remains by far the No. 1 manufacturing country. It out-produces No. 2 China by more than 40 percent. US manufacturers cranked out almost US$1.7 trillion in goods in 2009, according to the UN.
The story of US factories essentially boils down to this: They’ve managed to make more goods with fewer workers.
The US has lost almost 8 million factory jobs since manufacturing employment peaked at 19.6 million in mid-1979. US manufacturers have placed near the top of world rankings in productivity gains over the past three decades.
That higher productivity has meant a leaner manufacturing force that’s capitalized on efficiency.
“You can add more capability, but it doesn’t mean you necessarily have to hire hundreds of people,” said James Vitak, a spokesman for specialty chemical maker Ashland Inc.
The industry’s fortunes are brightening enough that US factories are finally adding jobs after years of shrinking their payrolls. Not a lot, but even a slight increase shows manufacturers are growing more confident. They added 136,000 workers last year — the first net increase since 1997.
What’s changed is that US manufacturers have abandoned products with thin profit margins, like consumer electronics, toys and shoes.
They’ve ceded that sector to China, Indonesia and other emerging nations with low labor costs.
Instead, US factories have seized upon complex and expensive goods requiring specialized labor: Industrial lathes, computer chips, fighter jets, healthcare products.
Consider Greatbatch Inc, which makes orthopedics and other medical goods. The company is expanding its manufacturing operations near Fort Wayne, Indiana. Greatbatch wanted to take advantage of a specialized workforce in northeastern Indiana, a hub of medical research and manufacturing.
“When you’re talking about medical devices, failure is not an option,” Greatbatch chief executive Thomas Hook said. “It’s a zero-mistake environment.”
“These products are customized and high-tech. They go into patients to keep them alive,” Hook added.
Hook said the US offers advantages over poorer, low-wage countries: Reliable supplies of electricity and water, decent roads. And some localities support businesses by providing infrastructure and vocational training for potential hires.
Centerline Machining & Grinding in Hobart, Wisconsin, which makes custom parts for manufacturers in the paper industry, plans to add to its staff of 26. However, it’s struggling to find the skilled tradesmen it needs for jobs paying US$18 to US$25 an hour.
Centerline chief executive Sara Dietzen laments that local vocational schools cut back training courses in recent years, having concluded that the future for manufacturing was dim. Not from her view it isn’t. For her company, output is all about speed.
“Our average customer wants a turnaround in less than three weeks,” Dietzen said. “You’re not going to get that in China.”
Still, economist Cliff Waldman of the industry research group Manufacturers Alliance/MAPI doubts that US factories will continue to expand their payrolls in the long run. Manufacturing, he said, is “not a job creator for the US, basically.”
Global competition will always force factory managers to try to replace expensive workers with machines or with low-wage labor overseas, Waldman said.
Mark Perry, a visiting scholar at the conservative American Enterprise Institute, likened the loss of manufacturing jobs to the exodus of workers from farms between the 19th and 20th centuries. If that migration hadn’t happened, Perry said, “we’d still have millions of people working in agriculture. Now, we can employ fewer people in factories.”
However, the transition can be painful, he conceded.
The US remains No. 1 in global manufacturing, accounting for 18 percent of global manufacturing output in 2008, but China is catching up. Its share of manufacturing output jumped from about 6 percent in 1998 to 15 percent in 2008.
Critics have a ready explanation for that: unfair competition.
Robert Scott of the left-l-eaning Economic Policy Institute said China is cheating in world markets — keeping its currency artificially low to make Chinese products less expensive overseas and unfairly subsidizing its exporters.
Scott and other critics want to see the Obama administration support US manufacturers by pressuring Beijing to drop the subsidies and let its currency rise freely. A higher-valued Chinese currency would make US exports cheaper for Chinese consumers.
Dietzen said she wasn’t fazed by Chinese manufacturing. Some of her customers have placed orders with Chinese companies, she said, only to return, frustrated, to her company.
Chinese factories want mainly big orders. And they demand lots of time to fill them.
Dietzen said her clients are “finding when they get their parts back from China, they’re not always what they want. So we end up doing the work anyway.”
“A common misperception,” Hook said, is that the US doesn’t make anything anymore.
The reality is rather different.
“We need a highly skilled work force,” Hook said. “So it’s very advantageous to be in a country like the United States where people are educated and ready to be hired.”
Taiwan Transport and Storage Corp (TTS, 台灣通運倉儲) yesterday unveiled its first electric tractor unit — manufactured by Volvo Trucks — in a ceremony in Taipei, and said the unit would soon be used to transport cement produced by Taiwan Cement Corp (TCC, 台灣水泥). Both TTS and TCC belong to TCC International Holdings Ltd (台泥國際集團). With the electric tractor unit, the Taipei-based cement firm would become the first in Taiwan to use electric vehicles to transport construction materials. TTS chairman Koo Kung-yi (辜公怡), Volvo Trucks vice president of sales and marketing Johan Selven, TCC president Roman Cheng (程耀輝) and Taikoo Motors Group
Among the rows of vibrators, rubber torsos and leather harnesses at a Chinese sex toys exhibition in Shanghai this weekend, the beginnings of an artificial intelligence (AI)-driven shift in the industry quietly pulsed. China manufactures about 70 percent of the world’s sex toys, most of it the “hardware” on display at the fair — whether that be technicolor tentacled dildos or hyper-realistic personalized silicone dolls. Yet smart toys have been rising in popularity for some time. Many major European and US brands already offer tech-enhanced products that can enable long-distance love, monitor well-being and even bring people one step closer to
RECORD-BREAKING: TSMC’s net profit last quarter beat market expectations by expanding 8.9% and it was the best first-quarter profit in the chipmaker’s history Taiwan Semiconductor Manufacturing Co (TSMC, 台積電), which counts Nvidia Corp as a key customer, yesterday said that artificial intelligence (AI) server chip revenue is set to more than double this year from last year amid rising demand. The chipmaker expects the growth momentum to continue in the next five years with an annual compound growth rate of 50 percent, TSMC chief executive officer C.C. Wei (魏哲家) told investors yesterday. By 2028, AI chips’ contribution to revenue would climb to about 20 percent from a percentage in the low teens, Wei said. “Almost all the AI innovators are working with TSMC to address the
FUTURE PLANS: Although the electric vehicle market is getting more competitive, Hon Hai would stick to its goal of seizing a 5 percent share globally, Young Liu said Hon Hai Precision Industry Co (鴻海精密), a major iPhone assembler and supplier of artificial intelligence (AI) servers powered by Nvidia Corp’s chips, yesterday said it has introduced a rotating chief executive structure as part of the company’s efforts to cultivate future leaders and to enhance corporate governance. The 50-year-old contract electronics maker reported sizable revenue of NT$6.16 trillion (US$189.67 billion) last year. Hon Hai, also known as Foxconn Technology Group (富士康科技集團), has been under the control of one man almost since its inception. A rotating CEO system is a rarity among Taiwanese businesses. Hon Hai has given leaders of the company’s six